DVD ISO finally uploaded - Available

Update: I finally have a solution to the International formats needed for the DVD/ISO!
So - Out they go Monday to international requests. Mike/Larry

After a number of issues the ISO of The Laptop Doctor had been posted (4.2gb). Since the automation portion has not been completed. You will have to request further information and payment detail via email "Subject: ISO/DVD". Please do not request without subject.

This is an early release I am still working out the details to have this done automatically. After returning from Paypal, a link is generated for each request, and since this is a new server/host I am not sure of it's speed, but I was promised a fast connection. The ISO videos are in the NTSC format (Region 1) and I have no way of knowing if PAL/SECAM machines can view these via computer.

What's on the ISO?
1: How to Properly Reflow an nVidia GPU
2: Repairing DV6000 (Intel) No Power Issues
3: Repairing DV6000 (AMD)
4: Repairing DV Jack Issue
5: Short Animation of DV Intel power paths

As stated before, I am sure there are a number of issues that Europe and Asia may have viewing, so they may have an additional wait. Unless your system has no region set. They will also be available as single views when completed.


Twelve (12) additional videos are currently being edited and pages created. Additional question?
email me at hoosiernewman@gmail.com These videos are intended for technicians, if you are a novice or have no technical training, I would not recommend them, as they are not for everyday hobbyist.

There were a number of issues that could not have been foreseen. Sorry for the delay. Be sure to let me know of any issues (in detail) that you may have.


!!! -Provider says I am over Storage Limit. Changing Plan- !!!

Comments

  1. bojensSat Mar 24, 08:08:00 PM EDT

    Where can I get this DVD ISO?

    ReplyDelete
    Replies
    1. HoosierFri Jul 06, 08:50:00 AM EDT

      The Video details page has the links http://www.mayohardware.com/Paypal.html

      Delete

Post a Comment

I cannot repair laptops for you via the internet, I can only answer questions related to posts. This is because I have not had experience on every motherboard that is out there. Bear with me.

If you do need it repaired. Contact me for quote (US/CDN Only)

Popular posts from this blog

Important parts on DV6000 and DV9000 series

Image
These are important parts if you are looking for shorts or opens on the DV series. This image shows the location of the FDS6679. A common cause of shorts in the DV series. When the power supply is plugged into the laptop and it shorts out/turns off it's usually caused by this MOSFET being shorted.  Plainly stated. You plug the adapter into the DC Jack and the Blue Ring fails to light up, and the Power Supply shuts off. Giving no power to the tip. To reset adapter, unplug from AC (mains) and wait 15-30 sec. Then plug in again. The adapter is not damaged, since this is how it is protected. These parts do not determine charge time or per centage. The FDS6679 only closes to complete Positive circuit.  The AO4407 only closes when the battery is plugged in. As a test- Check the voltage of the Drain side (pins 5-8) with AC adapter and no battery - you should see 0 volts.  When you contect the battery you should have 10-14v depending on DV6000 or DV9000 series. IF the AO44...
Read more

What Kills HP DV series laptops?

Image
The number one issue with DV Series is: Blank or No Video displayed. The number two issue is : (tied) No Wi-fi or Continuous rebooting After repairing a number of HP DV Series laptops. I wanted to isolate the problem and make it easier for me to fix, and have them stay fixed! So digging deep into them I can only come to a couple of conclusions of why they fail. 1: Manufacturing - Hann-Starr Either the oxidation on motherboard or the Graphics Chips. Since the failure comes in both versions AMD and Intel lines. And in Intel and nVidia GPU's it seems it could be at the factory. 2: Distribution - nVidia Could the transit time and shipping packaging be contributing to the oxidation on the GPU? On one unit after a number of reflow failures, I decided to remove the GPU and prepare to 'reball' the chip. Then and only then did I notice there was no solder on some pads. So that points the finger to nVidia. Oxidation is the culprit since the solder balls are put on a ...
Read more

Tips on Testing MOSFETs

Image
Imagine the flow direction Source to Drain This is how I test FETS  What I will try to do here is to provide a little insight on how to test  MOSFET's in circuit the easiest way I can think of. Essentially the FET acts as a switch, and the GATE either opens or closes the switch. When power is supplied to Pin 4 (usually the GATE) it will either open or close depending on the type of MOSFET it is. The arrows shows the direction for reference when using a meter to test.   Setting the meter in DIODE mode. On the N-Channel FET place the NEG lead on Pin 6/7 and the POS lead on Pin 2/3. You should get a reading of some value ~100 to 500 or higher. Imagine the flow direction Drain to Source On the P-Channel FET place the POS lead on Pin 6/7 and the NEG lead on Pin 2/3. Again you should get a reading of some value ~100 to 500 or higher. The reason I say pins 2/3 and 6/7 is ...
Read more