For Advanced Techs

Click to Read QRCode
After answering questions from average users it appears that things may need to change to better serve techs.  Though previously stated, this is a help site for techs, I have been inundated with questions from users.  Stay tuned.

Comments

  1. EdmarSun Jan 30, 07:34:00 PM EST

    I can't blame you. Can't wait for the new site. I will be your first member.

    ReplyDelete
  2. elficheMon Jan 31, 05:42:00 PM EST

    hello am technicien, laptop

    ReplyDelete
  3. asifnawazSat Feb 05, 03:13:00 AM EST

    i think it will be great.because only realibile questions will come and help All.and i think it is your right to do i thing like this,because you r giving your greate ideas and in return your demand is nothing.i agree with you.complete this job as soon as possible

    ReplyDelete
  4. Alex McvitieTue Mar 22, 09:31:00 PM EDT

    This is awesome any updates on the website ?

    -Alex.

    ReplyDelete
  5. HoosierWed Mar 23, 08:36:00 AM EDT

    Being composed, and formatted at this time. Domain sat idle for almost a year, so time to put it to work.

    ReplyDelete
  6. esgerothWed Apr 25, 04:39:00 PM EDT

    Is this still planned? Did the domain expire?

    ReplyDelete
  7. esgerothWed Apr 25, 04:40:00 PM EDT

    Is this still planned? Looks like the domain expired.

    ReplyDelete
  8. HoosierWed Apr 25, 05:27:00 PM EDT

    The domain is still active, but the URL has been deactivated - The new site is a membership based forum/blog. The reason is being it is to provide better support for the experienced techs. Provide video answered and detailed explanations.

    The number of questions I get from individuals non techs would prevent this. Many techs have questions that cannot be directly answered in a blog format.

    ReplyDelete

Post a Comment

I cannot repair laptops for you via the internet, I can only answer questions related to posts. This is because I have not had experience on every motherboard that is out there. Bear with me.

If you do need it repaired. Contact me for quote (US/CDN Only)

Popular posts from this blog

Important parts on DV6000 and DV9000 series

Image
These are important parts if you are looking for shorts or opens on the DV series. This image shows the location of the FDS6679. A common cause of shorts in the DV series. When the power supply is plugged into the laptop and it shorts out/turns off it's usually caused by this MOSFET being shorted.  Plainly stated. You plug the adapter into the DC Jack and the Blue Ring fails to light up, and the Power Supply shuts off. Giving no power to the tip. To reset adapter, unplug from AC (mains) and wait 15-30 sec. Then plug in again. The adapter is not damaged, since this is how it is protected. These parts do not determine charge time or per centage. The FDS6679 only closes to complete Positive circuit.  The AO4407 only closes when the battery is plugged in. As a test- Check the voltage of the Drain side (pins 5-8) with AC adapter and no battery - you should see 0 volts.  When you contect the battery you should have 10-14v depending on DV6000 or DV9000 series. IF the AO44...
Read more

What Kills HP DV series laptops?

Image
The number one issue with DV Series is: Blank or No Video displayed. The number two issue is : (tied) No Wi-fi or Continuous rebooting After repairing a number of HP DV Series laptops. I wanted to isolate the problem and make it easier for me to fix, and have them stay fixed! So digging deep into them I can only come to a couple of conclusions of why they fail. 1: Manufacturing - Hann-Starr Either the oxidation on motherboard or the Graphics Chips. Since the failure comes in both versions AMD and Intel lines. And in Intel and nVidia GPU's it seems it could be at the factory. 2: Distribution - nVidia Could the transit time and shipping packaging be contributing to the oxidation on the GPU? On one unit after a number of reflow failures, I decided to remove the GPU and prepare to 'reball' the chip. Then and only then did I notice there was no solder on some pads. So that points the finger to nVidia. Oxidation is the culprit since the solder balls are put on a ...
Read more

Tips on Testing MOSFETs

Image
Imagine the flow direction Source to Drain This is how I test FETS  What I will try to do here is to provide a little insight on how to test  MOSFET's in circuit the easiest way I can think of. Essentially the FET acts as a switch, and the GATE either opens or closes the switch. When power is supplied to Pin 4 (usually the GATE) it will either open or close depending on the type of MOSFET it is. The arrows shows the direction for reference when using a meter to test.   Setting the meter in DIODE mode. On the N-Channel FET place the NEG lead on Pin 6/7 and the POS lead on Pin 2/3. You should get a reading of some value ~100 to 500 or higher. Imagine the flow direction Drain to Source On the P-Channel FET place the POS lead on Pin 6/7 and the NEG lead on Pin 2/3. Again you should get a reading of some value ~100 to 500 or higher. The reason I say pins 2/3 and 6/7 is ...
Read more